Filling polyvinyl chloride with ordinary powder has been very commonly used, such as manufacturing rigid polyvinyl chloride pipes, the filling amount reaches 40%. However, the tensile strength and impact strength of polyvinyl chloride filled with powder must be reduced.

For example: when powder is added to 100 parts of polyvinyl chloride, the tensile strength decreases from 252 kg / cm2 to 215 kg / cm2 when added to 7.3 volume parts; the tensile strength decreases from 252 kg / cm2 when added to 13.5 volume parts 204kg / cm2; When added to 35 parts by volume, the tensile strength decreases to 150kg / cm2.

However, if the added powder particles become smaller (such as 5 microns, 2500 mesh), when added to 40-45% by volume, it can be found that the yield strength of the material is even higher than the original breaking strength. Flaky talc powder with an average particle size of 5 microns (2500 mesh) can show a reinforcing effect on polyvinyl chloride systems even at high contents. For impact strength, the addition of ultra-fine talc powder, the notched impact strength does not decrease within 15% by weight, the notched impact strength decreases, and the disturbance modulus can be significantly increased. However, ultra-fine powders have a very significant reinforcing effect on polyvinyl chloride systems such as PVC / CPE and PVC / ABS systems with added toughening agents. For example, in the PVC / ABS (= 100/8) system, when adding ultra-fine calcium carbonate, when adding 5 parts, the notched impact strength of the material increases from 10kg / cm2 to 25kg / cm2, and the tensile strength ranges from 29kg / cm2 to 28kg / cm2. When 10 parts were added, the notched impact strength increased from 10 kg / cm2 to 33 kg / cm2, and the tensile strength remained at 28 kg / cm2.

Clirik Machinery provides you with professional talc power making machine. HGM ultra-fine talc powder making machine can produce micro talcum powder within 3000 mesh, which absolutely can be the good choice to fill polyvinyl chloride.

If you have any questions, you can contact us directly. You can leave messages on our website or chat with us online.