Talc Raymond Mill

Introduction of Talc Raymond Mill

talc Raymond mill

Clirik YGM Series talc Raymond mill is widely used for micron powder producing. The output size can reach 425mesh. It is suitable to grind the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore,potassium ore pumice, etc.

Application of Talc Raymond Mill

talc grinding mill is the new type mining equipment for making micro powders, fine powders,which is widely applied in the industries of metallurgy, mining, chemistry, cement, construction, refractory materials, ceramics, and so on.The purpose of the micro powder grinding millis for super-fine grinding materials with hardness less than 9 in Moh’s scale and humidity less than 6 percent such as kaolin, limestone, calcite, marble, talcum, barite, gypsum, dolomite, bentonite mud, mica, pyrophyllite, sepiolite, carbon black, diatomite, graphite, alunite, fluorite, potassium feldspar, phosphorite, pigment, up to 200 kinds.

Working Principle of Talc Raymond Mill

Raymond mill is mainly composed of main unit, analyzer, fan, dischargeing cyclone separator, powder cyclone separator and air duct. Among them, the main unit consists of frame, blow shell, shovel, grinding roller and grinding ring.

1.The lump material will be conveyed into the storage bin by the bucket elevator after it is crushed into the required particle size by the jaw crusher.

2.Then electro vibrating feeder will uniformly transfer the material into the grinding chamber of the host machine.

3.The material is up thrown and fed into the space between the grinding roller and grinding ring in the process of synchronous rotation of the shovel and the grinding roller, and forms a cushion material layer.

4.The material on this layer is grinded between the grinding roller and the grinding ring. Thus, the purpose of powder production is achieved.

5.The grinded powder will be carried by the airflow of the fan into the analyzer for classification.

6.The powder with the qualified fineness will enter the large cyclone collector, together with the airflow through the pipes, for classification, and then, will be discharged by the discharging device, as the finished product.

7.The airflow is sucked into the air blower through the air return pipe on the upper part of the large cyclone collector.

8.The unqualified powder will be thrown to the external wall by the airflow and separated from the airflow.

9.The coarse powder will fall into the grinding chamber for regrinding due to its own gravity.

10.The whole airflow system is closed and cyclic, and it flows under the positive and negative pressure circularly.

Advantages of Talc Raymond Mill

1.Compared with the ball mill, the Raymond mill has higher efficiency, lower power consumption, smaller covered area, less investment.

2.The grinding roller compressed on the grinding ring tightly due to the centrifugal force.

3.The output and fineness of the finished product will not be affected when the grinding ring is worn to a certain degree.

4.The grinding roller and the grinding ring have a long replacement period, so it gets rid of the shortcoming that the wear parts of centrifugal mills have a short replacement period.

5.The classifying airflow of the Raymond mill flows according to the recycling process as: the fan mill shell cyclone separator the fan.

6.Compared with the high speed centrifugal grinder, there is less powder dust, and the operation room is clean without any pollution.

Technical Parameters of Talc Raymond Mill

Type

Roller

Max. feeding size(mm)

Fineness(mm)

Output(t/h)

Power(kw)

Size(mm)

No.

Dimension(mm)

Height(mm)

YGM7815

3

260

150

15

0.613-0.033

1-3

18.5

4300*3500*5100

YGM8314

3

270

140

20

0.613-0.033

1.2-4.6

22

5300*4100*5200

YGM9517

4

310

170

25

0.613-0.033

2.1-5.6

37

7100*5900*7900

YGM4121

5

410

210

30

0.613-0.033

2.8-10.5

75

9200*7250*9700

MTM1600

6

440

270

35

0.613-0.033

5-20

132

12550*5700*8350

 

 


Copyright 2015 by Shanghai Clirik Machinery Co. LTD All rights reserved